Introduction
Let’s talk about the SIG Blomax. You know the drill. One minute the line is humming, the next it’s snapping tubes and grinding everything to a halt. It’s frustrating, right? Usually, the problem comes down to heat. Specifically, the lamp can’t keep up, and it burns out. We built a replacement halogen lamp to fix that, plain and simple. It was designed to handle the brutal thermal shock and constant vibration that comes with the Blomax process. This isn’t just some off-the-shelf bulb. It’s a proper, structurally reinforced heating element made to work with your SIG machine. It runs longer, and it runs more consistently, so you can get back to producing without the constant interruptions.
The Power Behind the Process
Here’s the thing about the Blomax line—it needs serious, fast heat to melt those PET preforms. Our lamp delivers exactly that. It’s a 400V, 2500W unit, packing enough punch to hit the target temperature quickly. That means your cycle times stay steady, and you’re not waiting around. The 300mm active heating zone is also key. It’s the perfect length to match the exact heating window on your machine. No hot spots. No cold zones. Just even, reliable heat, so you don’t end up with weak spots in your bottles.
Built to Take a Beating
Standard lamps just can’t survive the shop floor. The quartz tube cracks under the pressure. So we built this one differently. We used a reinforced quartz envelope. It’s not just thicker glass; it’s engineered to handle the stress of rapid heating and cooling without fracturing. And the R7s double-ended connector? It’s a direct, drop-in fit. It handles the high current safely and locks the lamp in place, so it won’t wiggle loose and break prematurely.
What You Get—And What to Expect
Install this lamp, and you’re tackling the core issue: those frequent tube breakages. The result is stable, repeatable heat. That means fewer production stoppages and bottles that come out right, every single time. Plus, the long-life filament means you’ll be changing lamps a lot less often. Less downtime, less maintenance hassle. But wait, there’s one thing to keep in mind. Packing 2500W into a 300mm space generates a lot of heat. Your machine’s cooling system needs to be in good shape. If the cooling is undersized, the area around the lamp will get too hot, and that will shorten its lifespan. Just treat it like the high-output system it is, and make sure your cooling is up to the task. For your SIG Blomax, this replacement is the practical solution you need. The one that finally stops the burnouts and keeps your line running the way it should.